How to configure the Software- LINSN LED STUDIO for HC-103 and HC-101 receiving card with LED curtain?

How to install and set up LED studio software with LED curtain quickly ?
  --Pls download from: https://www.dropbox.com/s/pvlwwg9jb5ffy1b/NEW-LINSN-LED%20STUDIO%20SETUP.rar
  The software you used must be the newest model.
Note: (Important)
  1,  The VGA card of your computer must be setup to clone or copy model;
   2, Computer display resolution: 1024 by 768

LED studio setup steps: 1. Install the LED studio (serial number:888888);
2.open the soft ware: LED studio
3. click: option
4.choose: software setup;
5. input " linsn" directly(when you see the software setup windows);
6. input password: 168.
7.click: Receiver;
8. click: Load from files;
9. load the "RCG" files I supply for you. Pls email me to get one: huasuntech@aol.com
10.click: Send to receiver; click: OK;
11.click:Save on receiver.

If you use 2 or more receiving card with Led curtain screen, pls follow:

1. Install the LED studio (serial number:888888);
2.open the soft ware: LED studio
3. click: option
4.choose: software setup;
5. input " linsn" directly(when you see the software setup windows);
6. input password: 168.
7.click: Display connection
8. click: Load from files;
9. load the "CON" files I supply for you. CON file size is the size of your curtain pixel or pls find setup photo below:



Or get CON file by yourself, Just setup for a few number according to curtain pixel:

1, horizontal card number: 
2,vertical card number;
3,pixel number of each card; like 2.56 meter for 20mm, pixel number is 128,then put in 128
4.click: Send to receiver; click: OK;
5.click:Save on receiver.