How to setup software-LED SHOW-T9 for HC-102 receiving card?

1,How to install and set up software LED SHOW-T9 for HC-102 receiver quickly:
  Note: (Important)
 1,The network card of your computer must be 1000mbps or GIGABIT speed;
 2,Computer display resolution: 1024 by 768

1.Install the LED show; Pls download from:
 https://www.dropbox.com/s/qzndde91fhsj908/LED%20SHOW-T9%20Easy%20controller.rar

2.Open the software: LED show,(open as a administrator if you use Vista,Win7,If you can not install software on win7, pls install the file for win7 from that software link)

3. Click: Control(C)

4.Choose: Screen management(L);

5,Choose: Use net card, choose Gigabit ethernet Nic

6. Click: LED1, -(left corner of window)

7.Click: Config Selected one...

8. Fill in the password: T9; Click: OK, Click: Yes.

9. Click: Load... -(Button which is at the bottom of this window);

10.Load the "FILE FOR T9.DAT" files I supply for you.

11.Click: Send to receiving card; click: OK;

12.Click:Save on receiver.


2,The way to adjust the right size for your curtain:

1.Install the LED show;

2.Open the software: LED show,(open as a administrator if you use Vista,Win7)

3. Click: Control(C)

4.Choose: Screen management(L);

5. Click: LED1 (left corner of window);

6.Click: Config Selected one...

7.Fill in the password: T9; Click: OK, Click: Yes.

8,Click: Connect setting: setup the right size-Height and Wide pixels of your curtain;


9, Click: Send to receiving card

3,How to use the software with Madrix or arkaos Grand VJ.resolume or other third-party player? 

1, Open the software to choose Capture screen model




2, Pls move the Madrix or arkaos software play area to fix the software-T9 after you setup and close it.