FLC,VG Software Manual

Software Setup:  (FLC series, Video Grid series,Rubik series)

1,LED Studio from Linsn 
2,LED Show-T9 from Colornet
3,LED VISION from Colornet
4,Nova studio from Nova star

#1,(FLC Series) LED SHOW-T9 for HC-102 receiving card:
1,How to install and set up software LED SHOW-T9 for HC-102 receiver quickly:
  Note: (Important)
 1,The network card of your computer must be 1000mbps or GIGABIT speed;
 2,Computer display resolution: 1024 by 768

1.Install the LED show; Pls download from: 
https://www.dropbox.com/s/j9zgjcw0p2epbi2/New-LED%20SHOW-T9%20Easy%20controller.rar?dl=0
2.Open the software: LED show,(open as a administrator if you use Vista,Win7,If you can not install software on win7, pls install the file for win7 from  software download link)
3. Click: Control(C)
4.Choose: Screen management(L);
5,Choose: By Net card, choose Gigabit ethernet Nic
6. Click: LED1, -(left bottom corner of window)
7.Click: Config Selected one...
8. Fill in the password: T9; Click: OK, Click: Yes.
9. Click: Load... -(Button which is at the bottom of this window);
10.Load the "FILE FOR T9.DAT" files I supply for you. 
11.Click: Send to receiving card; click: OK;
12.Click:Save on receiver.

2,The way to adjust the right size for your curtain:
1.Install the LED show;
2.Open the software: LED show,(open as a administrator if you use Vista,Win7)
3. Click: Control(C)
4.Choose: Screen management(L);
5. Click: LED1 (left corner of window);
6.Click: Config Selected one...
7.Fill in the password: T9; Click: OK, Click: Yes.
8,Click: Connect setting: setup the right size-Height and Wide pixels of your curtain;(Curtain size/pitch size)
  (More: If you have much more HC-102 cards linked together,pls Put the right number by Row Count and Col count according to your card connection way.)

9, Click: Send to receiving card

If you want to rotate the image or turn the led curtain around for two sides use, you need setup signal from TOP to DOWN:

3,How to use the software with Madrix or arkaos Grand VJ.resolume or other third-party player? 
1, Open the software,Click: Setting(S)
2, Click: Software Setting
3,Play mode: choose :Capture screen model
Here is the video link for steps: http://youtu.be/Nwj6GjHJL7g

4,How to use the software with MacBook? 
First of all, you need your own software which run on Mac
Second, you need buy one DVI sending card to connect for Mac
Third, Connect DVI controller to MAC, open your software,move the player area to curtain place.
This is all.





2, Pls move the Madrix or arkaos software play area to fix the software-T9 after you setup and close it.

4,How to use HC-102 with video processor(T7 Sending card-DVI  inside):

Note: (Important)
  1,  The VGA card of your computer must be setup to clone,Duplicate or copy model;
  2, Computer display resolution: 1024 by 768

Firstly: check the connection of video processor with PC,Controller and curtain: (photo below)
  1,One cable: VGA/DVI output to Video processor VGA/DVI input;
  2,Another one cable: Video processor DVI output (Left) to video processor DVI input(right) (it is T7 sending card);
  3,Third cable: two ends USB cable from pc or laptop to video processor USB interface;
  4, Last cable: Lan cable output to receiving card input.

Then, Install the LED SHOW-T9 by same way like before,but this time you need click By sending card in the 

software window. pls follow image below.

Third, load the DAT file for T9 like before.

The End

#2,(FLC Series) LED studio(linsn) for HC-103 sending card+HC-101 receiving card: 

1,How to install and set up LINSN-LED studio software with LED curtain quickly ?
  --Pls download from:
https://www.dropbox.com/s/r81dcmhl22dq34z/New-LINSN-LED%20Studio%20Setup.rar?dl=0
  The software you used must be the newest model.

Note: (Important)
  1,  The VGA card of your computer must be setup to clone or copy model;
   2, Computer display resolution: 1024 by 768

LED studio setup steps:
1. Install the LED studio (serial number:888888);
2.open the soft ware: LED studio
3. click: option
4.choose: software setup;
5. input " linsn" directly(when you see the software setup windows);
6. input password: 168.
7.click: Receiver;
8. click: Load from files;
9. load the "RCG" files I supply for you. Pls email me to get one: huasuntech@aol.com
10.click: Send to receiver; click: OK;
11.click:Save on receiver.

2, If you use 2 or more receiving card with Led curtain screen, and setup .con file, pls follow:

1. Install the LED studio (serial number:888888);
2.open the soft ware: LED studio
3. click: option
4.choose: software setup;
5. input " linsn" directly(when you see the software setup windows);
6. input password: 168.
7.click: Display connection
8. click: Load from files;
9. load the "CON" files I supply for you. CON file size is the size of your curtain pixel or pls find setup photo below:

3, How to get CON file by yourself, Just setup for a few number according to curtain pixel:

1, horizontal card number: 
2,vertical card number;
3,pixel number of each card; like 2.56 meter for 20mm, pixel number is 128,then put in 128
4.click: Send to receiver; click: OK;
5.click:Save on receiver.


4,How to use HC-101 with video processor(801 Sending card inside of video processor):


Note: (Important)
  1,  The VGA card of your computer must be setup to clone,Duplicate or copy model;
   2, Computer display resolution: 1024 by 768

Firstly: check the connection of video processor with PC,Controller and curtain: (photo below)
  1,One cable: VGA/DVI output to Video processor VGA/DVI input;
  2,Another one cable: Video processor DVI output (Left) to video processor DVI input(right) (it is 801 sending card);
  3,Third cable: two ends USB cable from pc or laptop to video processor USB interface;
  4, Last cable: Lan cable output to receiving card input.

Second: Pls load the RCG and Con file like previous setup.

#3, (Galaxias Series,Rubik series) LED vision(colornet) for HC-103A external sending card+HC-101K receiving card: 

Plz reference to LED show.they are same setup. Download link:
 https://www.dropbox.com/s/xxlmr2q6bm3vz5m/LED%20VISION%20Setting%20file%20for%20Galaxias.rar?dl=0


2.Open the software: LED vision
3. Click: Control(C)
4.Choose: Screen management(L);
5,Choose: By Net card, choose Gigabit ethernet Nic
6. Click: LED1, -(left bottom corner of window)
7.Click: Config Selected one...
8. Fill in the password: T9; Click: OK, Click: Yes.
9. Click: Load... -(Button which is at the bottom of this window);
10.Load the "FILE" files I supply for you. 
11.Click: Send to receiving card; click: OK;
12.Click:Save on receiver.


#4, (Galaxias Series) Nova studio (Nova Star) for HC-103N sending card+HC-101N receiving card: 

here is the software-nova studio download link: